Tungsten Carbide Tip Lathe Machine Chucking Reamer 8.7mm Set of 2
Size - Cutting diameter: 8.7mm / 0.343"; accuracy class: H7; cutting flute length: 15mm / 0.59"; shank diameter: 8.3mm / 0.33"; 100mm / 3.94"; cutting direction: right hand Material - C1/K30 tungsten carbide is a tungsten-cobalt carbide with an average…
$16.99
M6 x 15mm Male Thread Knurled Clamping Knobs Grip Thumb Screw on 5Pcs - Black,Silver Tone
Thread Diameter: M6; Thread Length: 15mm/ 0.59". Safe, secure grip for the ultimate in adjusting and tightening control. Tightly molded-in metal insert insures optimal durability and functionality. Great for saw, drill press, lathe and routing jigs.
$11.94
7.9mm H7 Tungsten Carbide Tip Lathe Machine Chucking Reamer
Size - Cutting diameter: 7.9mm / 0.311"; accuracy class: H7; cutting flute length: 15mm / 0.59"; shank diameter: 8.3mm / 0.33"; 100mm / 3.94"; cutting direction: right hand Material - C1/K30 tungsten carbide is a tungsten-cobalt carbide with an average…
$11.99
6.9mm H7 Tungsten Carbide Tip Lathe Machine Chucking Reamer Set of 2
Size - Cutting diameter: 6.9mm / 0.272"; accuracy class: H7; cutting flute length: 15mm / 0.59"; shank diameter: 6.4mm / 0.25"; 90mm / 3.54"; cutting direction: right hand Material - C1/K30 tungsten carbide is a tungsten-cobalt carbide with an average…
$15.99
Machine Tap 1/2-13 UNC Thread Pitch 3 Flutes Titanium Plating HSS
Feature: 3 flutes are ground to provide rapid chip removal for efficient threading. Used with some cutting fluid or keep it wet when tapping, the tap will last longer. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron.
$16.49
S2 Magnetic Square Screwdriver Bit 1/4" Hex Shank 2" Length - Silver Tone
1. An excellent replacement for lost, bent or broken square screwdriver bits. 2. Made of S2 alloy steel, which is a high-hardness material commonly used in hardware. The magnetic tip can easily hold the screw when in use.
$8.49
R8 Collet 3/4" Mill Chuck Holder 65Mn Spring Steel 7/16-20UNF Thread - 7/16-20UNF Fine Thread - 3/4 Inch
1.Precision ground to close tolerance 2.Hardened and ground throughout 3.Suitable for all kinds of milling machine spindle taper hole for the R8 4.It used for clamping tools,change the taper hole of spindle,It is easy to use,to enlarge the use range of…
$17.18
Carbon Brushes 0.47x0.31x2.83 Inch for Electric Motors Power Tool 2Pcs - 0.47x0.31x2.83 Inch
The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite.
$10.49
Drill Press Spring Coil Spring Assembly 680mm Set of 2 - 0.8 x 8 x 680mm
Expand Length : 680mm/26.8inch ; Spring OD : 35mm ; Material Width : 8mm ; Material Thickness : 0.8mm Inner Mounting Type : Hook; Outer Mounting Type : Hook This is the chrome housed spring that returns the quill to the top after you have completed…
$12.49
10pcs Diamond Cutting Wheel 30mm Full Sand Diamond Discs Diamond Coated Wheel - Grey
1. The diamond cutting wheel is made of carbon steel, which is more durable than ordinary grinding wheels. The wheel is coated with fine diamond particles, thin and strong. 2. Full sand wheel, high cutting efficiency, high durability.
$14.49
Snappy 40050 Hinge Bit Set 5 Piece
Highlights : Use hinge bits for accurate drilling of holes for hinges, handles, drawer slides, etc. They have standard hex shank fits all power bit quick change chucks. Our drill bits are made of high speed steel for long ware.
$70.85
Tungsten Carbide Tip Reamer 11.2mm H7 Straight Flutes Lathe Machine
Size - Cutting diameter: 11.2mm / 0.441"; accuracy class: H7; cutting flute length: 18mm / 0.71"; shank diameter: 11mm / 0.43"; 114mm / 4.49"; cutting direction: right hand Material - C1/K30 tungsten carbide is a tungsten-cobalt carbide with an average…
$13.99
Chucking Machine Reamer Carbide Tip Straight Flute High Speed Steel Tool
Chucking Reamer: Size: ; tolerance: ; overall length: . Features just the base substrate without any additional coatings, good for wide ranges of applications Material: Carbide tip with sharp cutting edge.
$22.98
$23.98
$19.98
Electric Motor Commutator 5 Gear Teeth 5mm ID 10mm OD
This is a motor accessory that is mainly used to change the direction of the rotor current to keep the motor rotating in the same direction. Widely used in power tools, home appliances, high-speed DC motors, and other fields.
$7.99
12pcs 400# Abrasive Mounted Stone 2/5" Shank 1/9" Dia Round Stone Grinding Head - Silver Tone, Brown
[ Size ] - Shank Diameter: 2.35mm/1/9", Head Diameter: 10mm/2/5", Total Length: 57mm/2.24"; Grinding Head Material: Silicone, Diamond Sand. [ Material ] - This corundum grinding stone has high hardness, toughness, and good stability.
High Speed Steel Uncoated Machine Flutes Spiral Point Thread Threading Tap
Specifications: Thread Size: 5/16-18 BSW Thread Length: 22mm / 0.87" Total Length: 70mm / 2.76" Square End Size: 5mm x 5mm / 0.2" x 0.2" Thread Tolerance Grade: H2 Material: HSS (High Speed Steel) Finish: Uncoated Cutting Direction: Right Hand Numbers of…
$28.98
5.2mm H7 Tungsten Carbide Tip Lathe Machine Chucking Reamer Set of 2
Size - Cutting diameter: 5.2mm / 0.205"; accuracy class: H7; cutting flute length: 15mm / 0.59"; shank diameter: 5.4mm / 0.21"; 90mm / 3.54"; cutting direction: right hand Material - C1/K30 tungsten carbide is a tungsten-cobalt carbide with an average…
Round Shank 6 Straight Flutes Machine Cutter Chucking Reamer
Specification: Size: 5mm / 0.2" Total Length: 85mm / 3.35" Shank Diameter: 5mm / 0.2" Flute Length: 18mm / 0.71" Number of Flutes: 6 Flute Type: Straight Shank Type: Round Accuracy Grade: D4 Material: High Speed Steel, Cobalt M35 Package: 1 Pcs x…
$14.60
