Pingdingjuer Suppressor Cover (5/6/7 inch) - Suppressor Wrap-1800°F Heat Resistant, Double-Layer Flame-RetardantGlass Fiber & Silicon Lining（Camo($29.85Value)

Description

[High-Temperature-Resistant Protective Cover]: Featuring a three-layer design (outer layer: 1000D Oxford fabric; middle layer: flame-retardant material; inner layer: silicone-coated fire-resistant fiberglass), this cover and sleeve can withstand temperatures up to 1000°F, ensuring that equipment remains protected during outdoor activities and preventing heat damage or melting. [High-Temperature Insulation and Fire-Resistant Microfiber Sleeves]: The suppressor are equipped with high-temperature insulation (up to 200–300°C) and fire-resistant microfiber sleeves (up to 1000°C). They are 2 inches longer than the suppressor cover, making them easy to trim to fit your equipment once applied, and they cool quickly to protect your gear. [Anti-Slip Design]: Made of heat-resistant aramid rope, this strap is ideal for securing the cover to the silencer, preventing it from slipping during continuous firing. The silencer is wrapped with three adjustable hook-and-loop straps, suitable for standard devices with diameters ranging from 1.375 inches to 1.625 inches. You can adjust the tightness to secure the silencer cover. [Usage Tips]: 1. First, install the silicone/fiberglass sleeve. When firing, remove the outer flame-retardant film and use only the inner sleeve! The outer suppressor wrap can withstand temperatures of approximately 200–300°C only after the silencer has cooled down! 2. Allow the silencer to cool for a few minutes between shots, then fire again. [Note]: We recommend using this for slow-firing, hunting, and light-duty shooting, but it is not suitable for heavy-duty or high-speed shooting. Suppressor Cover (5/6/7 inch)