Hurricane Turning Tools, Pro Series, 28mm x 10mm Diamond Carbide Replacement Cutter For Woodturning Tools, Made in Germany($19.99Value)

Description

This Hurricane Pro Series Replacement Cutter for carbide woodturning tools is 28mm x 10mm diamond and 2.5mm thick with a 30 degree cutting angle. Each carbide cutter includes a Torx screw (4-40). Requires a T10 size Torx bit (not included). Made in Germany: Each carbide cutter is manufactured in Germany using top-quality C3 carbide steel and is assembled in America. Hurricane Pro Series Carbide Cutters are manufactured using C3 carbide steel, which will hold an edge longer! Turn a variety of materials using the same cutter - our cutters work great on hard woods, soft woods, acrylic, resin and more! Fits the Hurricane Full-Size Detailer as well as comparable wood lathe turning tool brands that accept 28mm x 10mm diamond by 2.5mm thick inserts.
The Hurricane Turning Tools, Pro Series, 28mm x 10mm Diamond Carbide Insert (HTT-457-PRO) fits the Hurricane Full-Size Detailer as well as tools from comparable brands that accept 28mm x 10mm (diamond) by 2.5mm thick inserts. Upon receiving your Hurricane Pro Cutter, we recommend marking it with a magic marker and storing it separately to ensure it doesn't get mixed up with other cutters.

Please note: This cutter comes with a 4-40 screw (5/16" length) which fits Hurricane Carbide Tools as well as most other brands, however, certain tools may require a different type of screw. If your tool does not accept a 4-40 screw (5/16" length), you will have to use the proper sized screw (not included). The screw that comes with this cutter requires a T10 size Torx bit.

Experience the superior performance of Hurricane Pro Series Carbide Cutters! They are ideal for use on a wide range of materials including hardwoods, softwoods, acrylic and resin. Each cutter is German engineered and made from C3+ carbide steel which is known for its exceptional edge retention and cutting efficiency. Unlike lower-quality alternatives, these cutters stay sharper longer, allowing you to spend more time turning and less time replacing cutters.
Features:


This Hurricane Pro Series Replacement Cutter for carbide woodturning tools is 28mm x 10mm diamond and 2.5mm thick with a 30 degree cutting angle. Each carbide cutter includes a Torx screw (4-40). Requires a T10 size Torx bit (not included).

Made in Germany: Each carbide cutter is manufactured in Germany using top-quality C3 carbide steel and is assembled in America.

Hurricane Pro Series Carbide Cutters are manufactured using C3 carbide steel, which will hold an edge longer!

Turn a variety of materials using the same cutter - our cutters work great on hard woods, soft woods, acrylic, resin and more!

Fits the Hurricane Full-Size Detailer as well as comparable wood lathe turning tool