JARYANNIX 71in Acrylic PVC Plastic Bender 110V Acrylic Heat Bending Machine | Manual Strips Heating Bender, with Light Box Heater, for Decoration($210.00Value)

Description

High Quality: The body is made of special aluminum profile, with high quality heating tube, long service life, portable, small occupation, low consumption and reliable operation. Maximum bending width is 70.87in(1800mm), heating thickness is 0.04-0.24in (1-6mm). Circulating Cooling System: With circulating cooling water system on both sides of heating pipe. It can make sure other parts (no heating is required) won't get thermal deformation. Power supply joint and water pipe joint are at the same end. Easy to Operate: If the thickness of acrylic sheet is beyond 6mm, you can use two heaters heat the top and bottom of the sheet at the same time, or you need to cut a slot on the sheet. Free plugging and unplugging, easy to storage and assembles to worktable very conveniently. Bending Machine Heater: The acrylic bending machine heater is the core part of bending machine. You can use it to assemble various kinds of ideal practical acrylic bender. It can bend all kinds of plastic sheet. Processing Material: Acrylic, Plastic, PVC, Plexiglass. Wide Application: Heat even and temperature adjustable. This acrylic heat bending machine can be widely used in decoration engineering, sign making, display cabinet, aquarium wrapping, lighting LED channel letter, bending the supermarket shelves, curtain wall, large light box, acrylic plates and plastic plates. Parameter
Voltage: 110V
Frequency: 50/60Hz
Power: 2000W
Maximum Bending Width: 70.87in(1800mm)
Heating Thickness: within 0.24in(6mm)
Package Type: Cardboard Box
Net Weight: 12lb
Shipping Weight: 19LB
Outer Packaging Size: 61.22*6.30*5.91in
Please note that the cooling water temperature should not exceed 40 ℃. If it exceeds 40 ℃, the water should be replaced promptly.

Recommended temperature for some regular materials
Acrylic: 210℃
Perspex: 195℃
PVC sheet: 155℃
ABS: 190℃
PET: 160℃
NOTE: Just for reference, and users may modify them according to their materials and working habits.

Attention
1.Machine should be placed in dry, clean, ventilated position, the operation of the machine placed in a horizontal position and smooth. Keep away from flammables and explosives.
2.For safety reasons, must be connected to a reliable safety grounding device must have three feet with ground connection.
3. The heating process leads to high temperature, so avoid contacting the heating area with fingers or skin.
4. Unplug the power cable/cord, if the machine will not be used in a long time.
5.Please note that the cooling water temperature should not exceed 40 ℃.

Item Included(022307)
1 x Acrylic PVC Bending Machine Heater
1 x Water Pump
1x Temperature Controller
1 x Water Thermometer