2PCS Heavy Duty Coil Spring Spacer for Car Springs Top/Bottom,1" Liftx4" IDx6" OD Rubber Coil Spring Booster Enhances Spring Rate,Universal Coil($16.66Value)

Description

Buyer's Note: Coil spring spacer has a single-sided groove and placed at the top and bottom of spring. OD is 5.98", ID is 3.96", height is 1.62", track width is 0.85". Can be installed on springs with OD of 5-5.5 inch, for cars, off-road vehicles, etc. Please verify the size before placing your order Upgraded Spring Rate: Coil spring spacer can enhances spring rate after installation, raises vehicle height by 0.2-1” due to the different weights of different cars. Let you drive smoothly whether you're carrying heavy loads or driving over rough terrain Installation: Simply jack the car up, remove the coil spring, compress the spring with a spring compressor, and place coil spring spacers on the spring top or bottom, put the spring back on. Please always operate under the guidance of a professional Shock and Noise Reduction: These coil spring boosters can help you solve the problem of sagging rear end of your car, provide extra support to your car buffer/front shocks/rear shocks and shock absorbers that can reduce the arc of vibration during driving Durable Material: Our coil spring spacers are made of premium rubber through the one-piece molding process, which makes it more wear-resistant, can withstands weights up to 2500lb, not easy to deform & broken under the prolonged compression of the spring

Product Information

Material: Rubber

Color: Black

Spring Track Width: 0.85 inch

Outer Diameter: 5.98 inch

Inner Diameter 3.96 inch

Weight: 28.91 oz

Size: 5.98 * 5.98 * 1.62 inch

Package: 2 x Coil Spring Spacer

Features: Solve the problem of unstable cornering under heavy load, smoother when cornering

Functions: Used to provide more extra support for the car and reduce noise from vibration.

Warm Reminder

1. Please measure the size before purchase, so as not to receive the size does not fit, causing you trouble

2. This spring spacer can be installed on springs with an OD of 5 inch to 5.5 inch, suitable for most vehicles on the market such as cars, off-road vehicles, etc

3. Improper installation will resull in operation failure or loss of vehicle control. Always refer to vehicle awner's manual for proper lift points

4. Be sure to use jack stand or other means to fully support the vehicle

5. After installation, keep the vehicle chassis is at the same driving height. After 100 miles (160 kilometers), check the installation of the product to keep it is working properly

Purchasing Advice

Each of our packages contains two (one pair) coil spring spacers that can be used to support your vehicle's front or rear springs only. If you want to install on both front and rear springs, we recommend that you purchase two pairs spring spacers