PTKTLAM Quick Change Handpiece T39 2.35mm Polishing Handle | Flex Shaft Shank, High-Precision, Rotary Grinder Tool($36.99Value)

Description

Requires Compatible Equipment: This product is required to be used on a flexible shaft with a detachable handle such as a hanging mill, a table mill, a drill shaft or a table saw. It cannot be used alone Precise Clamping Specifications: The clamping range of the chuck is 2.35MM, The end of this handle is 10.2mm, suitable for grinding all kinds of flex shaft hanging with snap rings Versatile Applications: Suitable for high-precision engraving, sanding, polishing design, grinding, and punching tasks Extended Operation Capability: The use of high-speed bearings results in low noise and the ability to work for long periods of time High Precision Performance: Quick Change Handpiece with concentricity of 0.02-0.03, high-speed bearings are not prone to overheating

DIRECTIONS FOR USE AND MAINTENANCE

The numbers refer to the spare parts pointed out in the design.

Exchange of the tools and lubrification:

exchange of the tools in easily done if the little lever 3 is turned 90°to the right or the left with the thumb.

lf the closing small pincer 2 does not come loose altho- ugh the little lever is turned 90°or if not sufficient clam- ping of the tool is achieved, this can easily be adjusted. If this adjustement has to be dane,turn at first, the little lever 3 90° so the small pincer will be open to a maxi- mum. Thereafter the handle's shaft 4 must to be fixed through putting a rejected mandrel or something like that through the two holes in the connection sleeve5.The small pinceris in thebottom locked with a lock-screw. Gring a long mandrel flat as a screwdriver in one end and put this down in the small pincer.

Loosen the lockscrew through truning it somewhat to the left. Thereafter the small pincer shall be screwed in or out so the right grip for the tool is received.

Lock the lockscrew and the handle is ready for use.

If used daily. the handpiece needs lubrication once for week. Loosen thereby screw 6 and drop a few oildrops into the threaded hole.