BEN'SHOME Loveseat Cushion Support Board, Sagging Couch 38-45" x 25" | Heavy duty 0.5" thick solid wood boards and supports under loveseat cushions.($47.88Value)

Description

YOUR COUCH FEELS NEW AGAIN - FIRM AND COMFORTABLE, NOT A HARD BOARD - Worried that a wood support will turn your sofa into a bench? It does the opposite. The board sits under the cushions and carries the weight your worn springs no longer hold, so the cushion above stays soft while you stop sinking into a hole. Your couch feels firm, level and comfortable again - like new the day you brought it home. Installs in about 60 seconds, no tools, no damage, no expensive replacement. 0.5" SOLID WOOD - 2X THICKER THAN OTHER BOARDS - HOLDS UP TO 400 LBS - Most boards sold as a fix for a sagging couch or sofa seat are thin MDF, plywood or foam, and they bow the first time someone sits down. These supports are heavy duty solid wood slats at a full half inch, sleeved in 600D Oxford fabric, and hold up to 400 lbs. They will not bend, crack or compress under daily use. FITS 38-45" WIDE LOVESEATS, 25" SEAT DEPTH - MEASURE BEFORE YOU ORDER - Take the cushions off first. For width, measure inside the frame - from the inside of the left arm to the inside of the right arm, not the outside of the sofa. For depth, measure from the back of the seat frame to the front edge. If your sofa falls between two sizes, order the smaller one. The support flexes to conform to the base and stays completely hidden under the cushions once the seats go back on. DOUBLE-SIDED ANTI-SLIP GRIP - IT WILL NOT SLIDE OR SHIFT - Fabric on both faces grips the sofa frame below and the couch cushion above, so the support stays where you put it instead of creeping forward when someone sits down. The boards give firm support across the seating area, while a soft fabric margin is designed to rest on the sofa base - anchoring the support and keeping hard edges away from your frame. Every board is rounded at the corners, so nothing rubs through your cushions. U.S. FAMILY BRAND - ORIGINAL DESIGN - LIFETIME REPLACEMENT GUARANTEE - We are a small family business in the United States and this is our own design. It slides invisibly under your cushions and has been restoring saggy loveseats and worn chair cushions for years without anyone buying new furniture. If a board ever breaks we replace it free, for as long as you own it - which is why we build with solid wood and not the cheapest material that would still pass. Fix a sagging couch without replacing it. The BEN'SHOME heavy duty couch cushion support board is a set of 0.5" thick solid wood boards, sleeved in 600D Oxford fabric, that slides under your seat cushions and carries the weight your worn springs and webbing no longer hold. Unlike foam inserts, thin plywood or MDF supports, these solid wood boards will not bend, sag or collapse - rated to hold up to 400 lbs. Worried a wood board will feel too hard? It works under the cushion, not on top of it: the cushion above stays soft while the seat underneath stops sinking, so your couch feels firm, level and comfortable again - like the day you brought it home. Works as sagging cushion support for couches, sofas, loveseats, sectionals, recliners, armchairs and chair seats. Available in multiple sizes from 20" to 96" wide and 19.7" to 30" deep, including options for a loveseat, deep seat sofa, oversized couch and L-shaped sectional. To choose the right size, remove the cushions and measure the width inside the frame, arm to arm, and the depth from the back of the seat frame to the front edge. If your sofa falls between two sizes, choose the smaller one. Installation takes about 60 seconds: lift the cushions, unfold the support boards, place them flat on the base and put the cushions back - no tools required. The double-sided anti-slip fabric grips the frame and cushion so nothing slides or shifts. A practical saggy couch fixer and a worn cushion replacement alternative from a U.S. family brand, backed by a lifetime replacement guarantee.