DALQUIS 2 Set Propane Push Button Piezo Igniter, Piezo Spark Ignition with 20" Long Wire and Ceramic Electrode Igniter for Gas Grill Range Firepit($8.49Value)

Description

𝐎𝐩𝐞𝐫𝐚𝐭𝐢𝐨𝐧 𝐢𝐬 𝐒𝐢𝐦𝐩𝐥𝐞: The propane push button piezo igniter with no battery required for ignition. Just press the red button to create a spark. Each press will produce a single spark, and it can withstand over 30,000 presses 𝐒𝐩𝐞𝐜𝐢𝐟𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬: The piezo spark ignition wire length is 20 inches / 500mm, the ignition needle length is 1.97 inches / 50mm, and the ignition distance is approximately 5-6mm. The output voltage is >= 18KV, and it can withstand temperatures up to 200 degrees Celsius 𝐄𝐚𝐬𝐲 𝐭𝐨 𝐈𝐧𝐬𝐭𝐚𝐥𝐥: Simply connect the wire to the piezo igniter, and ensure that the metal plate on the piezo igniter is connected to the ground wire or the metal plate of the grill or heater, and you can easily create a spark 𝐖𝐢𝐝𝐞 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐛𝐥𝐞: Grill igniter has a wide range of compatibility. It can be used for gas stoves/ovens, fireplaces, patio heaters, wall-mounted gas boilers, or as replacement parts for outdoor barbecues 𝐏𝐚𝐜𝐤𝐚𝐠𝐞 𝐈𝐧𝐜𝐥𝐮𝐝𝐞: 2pcs grill igniter replacement, 2pcs ignition ceramic electrodes, and 2pcs ignition wires Product Name: Propane push button piezo igniter
Material: PP
Applicable Gas: LP propane gas; Natural gas
Ignition Wire Length: 20 inch / 500mm
Ignition Needle Length: 1.97 inch / 50mm
Output Voltage: >=18KV
Temperature: 200°C
Maximum Number of Presses: Over 30,000 presses
Package List: 2pcs grill igniter replacement, 2pcs ignition ceramic electrodes, and 2pcs ignition wires

Note:
1. Keep the ceramic needle about 5 mm near the burner hole, otherwise it may not ignite the gas.
2. Ensure metal plate connects to ground wire or heater's metal plate for ignition to work.
3. Piezo igniter may need several times to push to ignite gas.