16” Hardwired Power Strip (NO Power Cord), 5 Vertical Outlets (NOT Tamper Resistant), NO Ears (Without mounting tabs on Both Ends), 15A (NOT a 20 Amp($32.00Value)

Description

16" / 0.41m Hardwired Power Strip, 5 Vertical Outlets (NEMA 5-15R, NOT Tamper Resistant), White No EARS (without Mounting Tabs) on both Ends; Mounting Clips Included - Please Add 0.12"/3mm in Height Measurement: L16″ x W1.61″ x H1.35″ (406 x 41 x 34.4mm); Casing/Outlet Height: 1.16"/0.19" (29.5/4.9mm) No Power Cord - Hardwired and to be Mounted at Your Desired Location. Installation Instruction Included 125V/15A/60Hz (14/3 AWG Wiring); Recommended Max Load 1440W (NOT a 20 Amp Unit) ETL Approved and Listed (Conforms to UL 5 and CAN/CSA C22.2 No. 62) 6 Easily Punched off Knockouts, 1 on Each Side - (Top/Bottom Cover, Both Sides/Ends) Great for Contractors, Electricians and Installers, as well as DIYers 16" Hardwired Power Strip with 5 Outlets - * NOTE: Measurement is approximate: For installation purpose, the length of the power strip unit does not include ears, (mounting tabs 0.67" / 17mm on each end). For models with ears, 2 x 0.67" / 17mm need to be added to the product length in the dimension listed above; the width does not include the size of screws (min. 0.06" / 1.5mm) on each side; the height (or thickness) does not include the receptacles (Regular Outlets: 0.19" / 4.9mm; TR Outlets: 0.25" / 6.3mm) above the surface of the casing, please consider Adding 0.12″/3mm in Height if Clips are to be used. - SAFETY WARNING: - Installation work of this unit must be done by a professional, a licensed electrician or an electric engineer. - Never install this unit during a thunder storm. - Switch off the power before you start installation work. - This unit is for indoor use only. - This unit is not intended for use in or around wet or potentially wet areas including, but not limited to, aquariums, saunas, showers and fountains.