Go Kart Clutch 3/4 Bore 12T with #35 Chain, for Predator 212 Centrifugal Clutch Compatible with Honda GX160, GX200, GX140, GX120, GC160, GC190, Harbor($25.49Value)

Description

【Note】:Our clutch is suitable for engines with a 3/4 "19.05mm aperture, but not for generators with a 0.787" 20mm aperture. 【Suit for】: 3/4" Bore 12 Tooth Centrifugal Clutch with 4 Ft #35 Chain, Common Clutch for 2-6.5 HP Engines using #35 Chain, Engagement Speed 2300±300 RPM. 【Compatible with】: This Clutch kit is compatible with Honda & Honda cloned engines GC160, GC190, GX120, GX140, GX160, GX200. Also fit for Harbor Freight Greyhound 196cc and Harbor Freight Predator 212cc. 【Tips】: Also fits for most 5.5/6.5 HP clones, 4-6.5 motors in all brands and any other engines with 3/4 crank shaft and 3/16” key way. For Briggs & Stratton and 2 - 6.5 HP with 3/4" Shaft. For Tecumseh Engines 2 -6.5 HP with 3/4" Shaft 【Installation Tips】Before installation, you need to drop a circle of lubricant above the snap ring and wait for it to penetrate, you can rotate it without any obstruction (please refer to the picture for the exact position). 【Pre-use test】 When the clutch is just installed and started to run, it needs 3-5 times to break in. The method is as follows, first, no load running to the clutch first engagement, keep it for 10 seconds and then turn off the engine to cool down; second, load gradual 3 times from 0 to full speed, each interval of 2 minutes to cool down. If there is no problem after these two steps, you can avoid the problem that insufficient speed will cause the clutch internal dumping block and clutch shoe, and insufficient contact area will lead to slipping and friction smoke. 【Note】: Centrifugal clutch designed to be used on one wheel karts with rear tires ≤ 15" tall, and engines 2hp-6.5hp. 【Package including】:1 x Centrifugal Clutch, 1 x 4 Ft #35 Chain, 2 x Set Screws and 1 x Connecting Link. Dimensions:
Shaft size: 3/4" Bore
Chain Size: #35 Chain ( 4 Feet )
Tooth Count: 12 Tooth
Clutch Diameter: 107 mm
Clutch Height: 55 mm
Engagement Speed: 2300±300 RPM
Recommended Engine: 2HP - 6.5HP, 3/4" shaft with flat key

Package Including:
1 x Centrifugal Clutch
1 x 4 Feet #35 Chain
2 x Set Screws
1 x Connecting Link.

Compatible with
Fits for 2-6.5hp Honda & Honda cloned engines GC160, GC190, GX120, GX140, GX160, GX200
For Briggs & Stratton and 2 - 6.5 HP with 3/4" Shaft
Common clutch for 3.5-7hp engines using #35 Chain
Tecumseh Engines 2 - 7 HP with 3/4" Shaft
Other engines with 3/4 crank shaft and 3/16" key way
Most 5.5 HP clones, 6.5 HP clones and 4-7HP motors in all brands