King Ma NP-FZ100 Dummy Battery Decoded NP-FZ100 Battery Replacement with Type-C Spring Power Adapter Cable for Sony Alpha A7C A7M3 A7M4 A7S3 A7R3 A7R4($29.99Value)

Description

【Compatibility】 The Type-C cable dummy battery kit for Sony Alpha FX3 A7C A7M3 A7M4 A7S3 A7R3 A7R4 A9 ILCE-9 Cameras (Tip: only part of the applicable camera models are listed, before purchasing, please check that your camera is compatible with NP-FZ100 batteries). 【NP-FZ100 Dummy Battery】 A practical supply battery replacement for Sony cameras, with this Type-C dummy battery, your camera can get uninterrupted power supply easily, ideal for long time video recording or live streaming, etc. (If the power cannot be used after a few minutes of use, please check if the camera is set to power saving mode) 【Simple and Convenient to Use】 KingMa NP-FZ100 dummy battery replaces the Sony NP-FZ100 battery, its Type-C plug can connect to power bank, car power supply adapter, desktop & wall PD/QC charger. (Input: 9V 3A; Output: 8.4V, 2A. Please note that you cannot use a computer or stabilizer to charge.) 【Safer Protection】 with over voltage protection, over heat protection, overcharge and short circuit protection, in order to make your camera work better, please use a high-quality mobile power, it is more suitable for the momentary power demand of the camera shutter. 【24 Hours Friendly Customer Service】 Please be sure to close the battery compartment door, otherwise it may not be able to start the camera. If you have any problems with our product, please read the instructions in detail, or leave us a message, we will provide you with the best solution.

Features:
Material: ABS+PC
Input: USB C QC/PD 9V 3A
Output:8.4V 2A
Cable Length: 50-120cm
Weight: 75g
Compatible with Sony Alpha FX3 A7C A7M3 A7M4 A7S3 A7R3 A7R4 A9 ILCE-9 Cameras

Package: 1 x Fully Decoded NP-FZ100 Dummy Battery

Tips:
① In order to make your camera work better, please use a high-quality mobile power, mobile power bank is output guarantee of at 9V 3A current. When the power is not enough, will not start or can not shoot properly, Please select a larger current of DC 3A or more is better.
② Do not use the computer USB supply for the camera, because most computer USB 2.0 output voltage is 9V,But the current is less than 500mA.
③Some mobile phone / tablet usb charger with identification resistance, can not identify the camera, the current can not meet the requirements, it is not recommended.