BJTDLLX Short Shaft Outboard Motor, 2 Stroke 12 HP Outboard Boat Motor, 169CC Heavy Duty Fishing Boat Engine Marine Engine Tiller Control Motor with($728.99Value)

Description

【2-stroke 12HP Outboard Motor】The 5500 rpm 2-stroke 12 hp boat motor can provide 661-1763 pounds of thrust and 8-30 kilometers per hour speed, providing you with a comfortable and labor-saving sailing experience. The water cooling system helps to cool the motor and has better performance. The design of the vent can also extend its service life. 【High Quality Aluminum】The 2-stroke 12 hp outboard engine is made of high-quality aluminum, which is resistant to fracture, corrosion, acid, and deformation, making it suitable for use in water. The outboard engine is suitable for small ships with a length of 19.69 feet and a weight of less than 661 pounds, such as inflatable boats, iron boats, plastic boats, fiberglass boats, and wooden boats. 【Multi Speed Cruise】Outboard motor have three continuously variable transmission gears: forward, neutral, and reverse. You can also cruise at a constant speed to enjoy different cruising experiences according to your needs. Due to the simple structure and complete accessories of the outboard engine, you can easily install it on your ship and have a more comfortable sailing experience. 【Easy to Use】The CDI ignition device and manual start enable you to start quickly and safely. The flameout switch on the handle allows you to stop the engine with one click. The equipped silencer brings you a quieter sailing experience. The 6.34Gal external fuel tank saves you the trouble of frequent refueling. 【Gear Oil Filling Method】There is a screw on the gear box, unscrew the screw to add gear oil. Each outboard engine is filled with gear oil before leaving the factory, so it does not need to be refilled for the first time. After that, add it according to personal use and check it every ten hours. Reminder: The oil must be two-stroke special oil.

Brand: HANGKAI

Displacement: 169CC

Gear ratio: 2.08(27:13)

Cylinder: 2

Max.speed(r/min): 4500-5500

Gear Positions: F-N-R

Packing size: 120x70.5x37.5cm

Ignition System: CDI

Cooling System: Water-cooling

Control System: Tiller control

Starting System: Manual start

Control System: #93 gasoline

N.W./G.W.(kgs): 27/31

Bore x Stroke(mm): 50x43

Recommended Propeller range: 3 -9""1/4''x8""

Recommended Lubricant: 2 Stroke Lubricating oil

Mixing ratio: Fuel:oil=50:1

Trim and tilt system: Manual Tilt

Overall LxWxH(cm): 78.3x33.2x104

Standard fuel tank capacity: 24L

Must Read before using!

Two stroke 12 hp:

Firstly, Fill the gear oil (open gear box lid and fill it).

Secondly, Fill NO. 92 petrol, lightly press oil pump 6-10 times.

Thirdly, Fill engine oil don't exceed the head of the pattern.

Forthly, turn the throttle to the start up and turn the accelerator gets up to 50%.

Then, Rapidly pull the starter line.

After the motor start, please turn the throttle to running state.

Then, it can be operated now.

Don't do the following will avoid cylinder Scoring:

1，start the motor in the water

2, use the motor when it stop cyling water

Even if you want test the motor, it should be done in the river!

When there is no water coming out from the motor,please stop using it immediately ,then check the impeller of Water pump or check if the water outlet has been blocked.