SeaFrogs VPS-100 Vacuum Alarm Alertor Detection, Vacuum Leak Check System | For Seafrogs Meikon underwater camera housings case with vacuum pump($106.00Value)

Description

Designed for Seafrogs housing for Sony FX3 FX30 A7 II NG A7R III A7M3 A7R IV A7S III A7R V A9 II, for Canon 6D II 5D IV, EOSR EOS PR EOS R5 for Nikon Z6 II Z7II Case with Vacuum Pump System Design (More compatible models please check the description) The vacuum pump system is used for checking the water tightness of underwater camera housing before submerging or using when diving / snorkeling above 40 meters The complete electronic circuit and the battery are located in the robust anodized aluminum one-way valve body for even more convenient operation and ease of installation VPS-100 features a calibrated pressure sensor and processor and the The green/red LEDs are visible through the transparent acrylic circular window The installation is simple and straightforward, just screwing the detector into the accessory port, draw a vacuum on your housing and wait for few minutes, then you can check the water tightness immediately

Seafrogs VPS-100 Pre-Dive vacuum leak check system

Please Make Sure that your underwater camera housings are with Vacuum Pump System Design.

Compatible models of underwater camera housings:
For Sony A6xxx series Salted Line 60M/195FT Underwater camera Case
For Sony RX1xx series Salted Line 60M/195FT Underwater camera Case
For Sony A7 II NG Series 40M/130FT Underwater camera Case
For Sony A7 III 40M/130FT Underwater camera Case
For Sony A7R III 40M/130FT Underwater camera Case
For Sony A7S III 40M/130FT Waterproof camera Case
For Sony A7R IV 40M/130FT Waterproof camera Case
For Sony A9 40M/130FT Underwater camera Case
For Panasonic Lumix GH5 & GH5 S 40m/130ft Underwater Camera Case
For Olympus TG-3 & TG-4 60m/195ft SeaFrogs Underwater Camera Case
For Olympus TG-5 & TG-6 60m/195ft SeaFrogs Underwater Camera Case
For Fujifilm X-T2 40M/130FT Underwater camera Case
For Fujifilm X-T3 40M/130FT Underwater camera Case
For Fujifilm X-T30 40m/130ft SeaFrogs Underwater Camera Case
ForCanon G1X III 40m/130ft SeaFrogs Underwater Camera Case
For Canon EOS M50 40m/130ft SeaFrogs Underwater Camera Case
For Canon EOS M6 Mark II Waterproof camera Case
For Canon EOS R Waterproof camera Case
For Canon EOS RP Waterproof camera Case
For Canon EOS R5 Waterproof camera Case

Package Including:
1*Electronic valve
1*Pump
1*Screwdriver (for battery replacement)

The vacuum pump system is used for checking the watertightness of underwater camera housing before submerging

NOTICE: THIS ACCESSORY IS NOT MEANT TO BE USED UNDERWATER AS PER MANUFACTURER INSTRUCTIONS!

The installation is simple and straightforward, just screwing the detector into the accessory port, draw a vacuum on your housing and wait for few minutes, then you can check the water tightness immediately