Idatalink Maestro Acc-RR-SPDIF Amplifier Interface Adapter Analog to Digital SPDIF Converter Module($54.99Value)

Description

iDatalink Maestro ACC-RR-SPDIF Amplifier Interface Adapter Analog to Digital SPDIF Converter Module The iDatalink Maestro ACC-RR-SPDIF is an analog-to-digital (SPDIF) converter for the retention of a factory digital amplifier when replacing the factory radio with an aftermarket head unit. The ACC-RR-SPDIF converts the analog preouts of your aftermarket head unit to a digital audio signal (SPDIF) in order to retain your vehicle's factory amplifier. Installation requires the Maestro RR or RR2 interface module and a vehicle-specific T-harness (all sold separately) Analog-to-SPDIF Adapter: The iDatalink Maestro ACC-RR-SPDIF is an analog-to-digital (SPDIF) converter for the retention of a factory digital amplifier when replacing the factory radio with an aftermarket head unit. The ACC-RR-SPDIF converts the analog preouts of your aftermarket head unit to a digital audio signal (SPDIF) in order to retain your vehicle's factory amplifier. The iDatalink Maestro ACC-RR-SPDIF is an analog-to-digital (SPDIF) converter for the retention of a factory digital amplifier when replacing the factory radio with an aftermarket head unit. The ACC-RR-SPDIF converts the analog preouts of your aftermarket head unit to a digital audio signal (SPDIF) in order to retain your vehicle's factory amplifier. Installation requires the Maestro RR or RR2 interface module and a vehicle-specific T-harness (all sold separately).

Analog-to-SPDIF Adapter: The iDatalink Maestro ACC-RR-SPDIF is an analog-to-digital (SPDIF) converter for the retention of a factory digital amplifier when replacing the factory radio with an aftermarket head unit. The ACC-RR-SPDIF converts the analog preouts of your aftermarket head unit to a digital audio signal (SPDIF) in order to retain your vehicle's factory amplifier.

The ACC-RR-SPDIF features two dip switches for the input signal voltage and bit-rates for the SPDIF output:

Dip Switches: The ACC-RR-SPDIF features two dip switches for the input signal voltage and bit-rates for the SPDIF output.

Input Level: Set the input level selection switch to match the preout voltage of your aftermarket head unit. Settings include 3V RMS (Low) or 5V RMS (High). Bit-Rate: Choose the appropriate bit-rate setting to match the factory amplifier input. This will be specified in the installation guide for a Maestro radio replacement solution. Settings include 44.1 kHz or 48 kHz.

What's in the box:
◾iDatalink ACC-RR-SPDIF Amplifier Interface (Analog-to-SPDIF adapter module)
◾Preout harness
◾Power/ground harness
◾Data harness

MFR#: ACC-RR-SPDIF

Note: The ACC-RR-SPDIF must be installed as part of a Maestro RR/RR2 solution with a vehicle specific T-harness (all sold separately).