TMCRAFT 128OZ Double-Walled Mini Keg with Detachable Faucet & Regulator | Double-Walled Insulation, Detachable Faucet and Upgraded Regulator,($139.99Value)

Description

DOUBLE-WALLED: Double-walled stainless steel insulation keeps beverage warm/cold for 8 hrs. The drink tank growler tap dispenser kit is constructed with food grade 304 stainless steel which keeps beer flavors and fresh KEEP BEER FRESH: Mini dispenser system can maintain vacuum pressure in the keg and keep fresh for few mouths. Perfect for homebrew, draft and craft DERACHABLE DESIGN: The new spear cap lid style allows you to detach both the regulator & spout while keeping keg contents under pressure for storage. , 128oz capacity and the size of 6.7"L x 6.7"W x 15.6"H fits standard home cooler/fridge and easy to transport UPGRADED REGULATOR: Upgraded regulator shows more accurate pressure. Monitor the current PSI from the regulator gauge, fine-tune pressure by rotating the adjustment knob can make the beer get perfect carbonation and head CO2 CARTRIDGE SYSTEM: Screw CO2 gas cartridges（3/8" Thread）into the regulator to supply pressurized carbonation to your keg brewing system. 16g capsule can tap 128OZ of beer. (CO2 CARTRIDGE NOT INCLUDED)

COMPONENTS

1. Double Walled Mini Steel Keg (128oz).

2. Detachable Stainless Steel Spear

3. Brass Faucet.

4. Black Bakelite Knob.

5. CO2 Regulator

6. Thread 3/8" CO2 Cartridge/Capsule (not included).

HOW TO ASSEMBLE

1. Manually clean mini-keg, cap, spear body, faucet and beer hose with warm water and mild soap before use.

2. Pour craft beer, draft and homebrew into the keg.

3. Install faucet into spear body.

4. Attach hose into the spear.

5. Connect the newly assembled tap system to the top of the keg by screwing it on.

6. Turn in a new 16g C02 capsule with thread type of 3/8", turn clockwise firmly into the regulator base. DON'T stop turning if you hear a slight gas leak swish, finish turning it in all the way it seals properly.

7. Connect the regulator to the spear body and check whether the regulator knob is in OFF position.

8. Put a glass or pitcher under the faucet spout, with the faucet knob puller forward(ON), Slowly turn the regulator knob on in the clockwise direction, until beer starts to flow out. Suggest tapping 5-8PSI.

Note: Once the keg is completely empty, pull the pressure relief valve to release the CO2 gas. Once empty, you can remove CO2 cartridge.