2 Pack Compatible for Ptouch HSE251 HSe-251 HS251 HS-251 23.6mm 0.92" Heat Shrink Tube Tape Black on White for PT-D600 D600VP PT-P700 P750W P900W($17.89Value)

Description

Product Information: Cruxer compatible with Ptouch Heat Shrink Tubing Label HSe-251 HSe251. Size: 23.6mm(0.92") Width, 1.5m(4.92feet) Length. Color: Black Printe on White Heat Shrink Tubes. Shrink Rate: 2:1. Recommended for use with cables/wires with a diameter between 7.3-14.3mm (0.29-0.56inch). Material: Heat shrinkable label has excellent flame retardant and insulating properties, very soft and elastic, low shrinkage temperature and fast shrinkage. These are Water Resistant (Waterproof), Fade Resistant, Chemical Resistant, Temperature Resistant, could be used in a variety of scenarios. Application: It can be widely used in wire connection, wire end treatment, cable label classification, solder joint protection, wire harness identification, resistance and capacitance insulation protection, corrosion protection of metal rods or pipes, etc. Compatible for P Touch Label Makers: PT-1400, PT-1500, PT-1500PC, PT-1600, PT-2200, PT-2210, PT-2300, PT-2310, PT-2400, PT-2410, PT-2430PC, PT-2470, PT-2500PC, PT-2600, PT-2610, PT-2700, PT-2710, PT-2730, PT-2730VP, PT-330, PT-350, PT-3600, PT-520, PT-530, PT-540, PT-550, PT-580C, PT-7500, PT-7600, PT-9200DX, PT-9200PC, PT-9400, PT-9500PC, PT-9600, PT-9700PC, PT-9800PCN, PT-D600, PT-D600VP, PT-E500, PT-E500VP, PT-E550W, PT-E550WVP, PT-H500LI, PT-P700, PT-P750W, PT-P750WVP, PT-P900W, PT-P950NW. Cruxer Compatible PT Heat Shrink Tube Label Tape HSe251 HSe-251 HS-251 HS251 23.6mm x 1.5m (0.92 inch x 4.9 feet) are widely used in marking and identifying cables and wires permanently.

Those item has a wide range of application in not only power, telecommunications, network engineering industry but also in the family, office, medical, catering and retail industries

How to AVOID wasting your label tape?
1. Be sure your machine is available with this "Label Setting" function.
2. Set the space you prefer on your label maker first Before printing,then you will get a better print.

Tips:Before installing,Turn the ribbon spool counter clockwise once or twice to tighten the ribbon to avoid any breakage or stuck of the tape.

Used for Below Ptouch Printers:
PT-330, PT-350, PT-520, PT-540, PT-580c, PT-1400, PT-1500pc, PT-1600, PT-1650, PT-2200, PT-2210, PT-2300, PT-2310, PT-2400, PT-2410, PT-2430PC, PT-2500pc
PT-2600, PT-2610, PT-2700, PT-2710, PT-2730, PT-2730VP, PT-7500, PT-7600, PT-H500, PT-E500, PT-E550W, PT-P700, PT-P710BT, PT-P750W, PT-P750WVP
PT-D600, PT-530, PT-550, PT-3600, PT-9200pc, PT-9200dx, PT-9400, PT-9500pc, PT-9600, PT-9700PC
PT-9800PCN, PT-E800W, PT-P900, PT-P900W, PT-P950NW, PT-D800W