BETAFPV LiteRadio 2 SE Radio Transmitter Mode 2 Frsky D8 | Support BETAFPV Configurator V2, Firmware Update, FPV Simulator, USB-C Charging, Joystick($42.99Value)

Description

【Kindly Note】Please kindly note This remote controller comes with the Frsky D16 (FCC & LBT) protocol, this protocol currently does not support the Frsky receivers with ACCST 2.0 firmware or higher, and it can only bind with ACCST 1.X firmware version XM+ receivers.System Upgrade: Updates with BETAFPV self-developed LiteRadio System. Player can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitter, which is more convenient for the beginner racer to operate 【Frsky FCC D16 Protocol】 LiteRadio 2 SE transmitter comes with Frsky FCC D16(ACCST1.X) by default. Pilots can easily change Futaba S-FHSS, Frsky D8, Frsky FCC D16, and Frsky LBT D16 mode via the radio transmitter. For how to flash, please refer to product pictures and user manual 【BETAFPV Configurator V2 Supported】 It is an open-source configurator tool tailored for BETAFPV drones and remote controls. It enables pilots to effortlessly configure and fine-tune various parameters, ensuring more efficient and optimized flight control. Officially released in Dec 2024, supports Windows/macOS/Linux (Debian family) platforms 【FPV Simulators & Platforms Supported】 This radio transmitter has the function of an FPV simulator, which can act as a USB Joystick, suitable for FPV beginners to play FPV simulators like Liftoff, TRYP, DRL, etc. Whether on a desktop, Android device, or tablet, LiteRadio 2 SE ensures smooth compatibility across all platforms. With the added Xbox mode, enjoy effortless integration with the DJI Flight Simulator on the Windows system and elevate your virtual flying experience to new heights 【Built-in Battery&Charging Module】 LiteRadio 2 SE radio transmitter remote controller has a built-in 1000mAh 1S battery, which can use up to 8 hours. Comes with a built-in charging module, supports USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-charged(when the voltage is lower than 3.5V), the LED will turn red first, then it will turn blue and flash slowly Kindly Note
Binding & Protocol: Please note that the default protocol of this transmitter is Frsky D16, it can change the protocol to Frsky FCC D16, Frsky LBT D16, Frsky D8, or Futaba S-FHSS, all of them are the Frsky version so that it can only bind with the drone and receiver which also is the same version of Frsky. Kindly note it can't bind with the ELRS version receiver.
Firmware of the Receiver: Lite Radio 2 SE transmitter with Frsky D16 &LBT protocol currently does not support Frsky receivers with ACCST 2.0 firmware and above, it can only bind with the ACCST 1. X firmware version XM+ receiver.
Setting: The user can set up all data for this transmitter via the BETAFPV Configurator. Please note that DO NOT power on the transmitter first and connect it to the PC, otherwise the USB port will be invalid.

FAQ
How to switch the protocol
To change protocols (Frsky FCC D16, Frsky LBT D16, Frsky D8, or Futaba S-FHSS), you have to power it off first, then press and hold the bind button while you power it back on. After that, the flash times of the red LED before the buzzer alarms will change, and it will indicate which protocol it is on.

How to operate the joystick calibration
The joystick data may be offset after it has been used for some time (if the joystick is hit physically). Users need to re-calibrate joysticks refer to the steps in manual verse 8.

Specifications
Item: LiteRadio 2 SE
Color: White
System: CC2500
Channel: 8
Support Protocol: Frsky FCC D16(by default)/ Frsky LBT D16 / Frsky D8 / Futaba S-FHSSSupport USB Charging / Firmware Update
Support BETAFPV Simulator Connected / Customized LiteRadio System / Joystick Calibration
LED Light: Red-Power On / Red-Warning if the voltage is lower than 3.5V / Blue-Normal
Battery: Built-in 1000mAh 1S Battery
Charging Connector: USB 3.0 Type-C

Package
1 * LiteRadio 2 SE Radio Transmitter
1 * User Manual
1 * USB Type-C Cable