White Premium Pavement Tape 4" (150' Foot Rolls) Wet Reflective Court Floor Marking Tape - Aluminum Based FOL 300 Heavy-Duty Grade($119.99Value)

Description

4" Inch White Pavement, Court, and Floor Marking Tape. Aluminum based construction for conformability. Heavy-Duty grade. Easy to apply. WET REFLECTIVE - it will reflective in wet/rainy/fog environments Self adhesive, conformable, aluminum based product. Semi permanent or temporary applications. Heavy-Duty Grade is highly reflective. Holds up to traffic driving straight over it. However, twisting tires can cause it to release Consists of an aluminum film coated with adhesive on the bottom and coated with paint and reflective glass beads on the top. 4" Inch White Pavement, Court, and Floor Marking Tape. Aluminum based construction for conformability. Heavy-Duty grade. Easy to apply. This is a "Wet Reflective" material meaning it will reflective in wet/rainy/fog environments Apply to clean dry and fairly smooth surface and then press in with a heavy bouncy rubber tire. The rougher the surface the more pressure that should be used. When properly applied the tape will seal with the surface forming a water tight bond. Can be applied using a floor tape applicator. -Self adhesive, conformable, aluminum based product. -Semi permanent or temporary applications. -Can be removed. (Note - tape is fine for straight lines but is not flexible enough to create curved lines.) -Simple installation procedure. -Heavy-Duty Grade is highly reflective. -Consists of an aluminum film coated with adhesive on the bottom and coated with paint and reflective glass beads on the top. -Holds up to traffic driving straight over it. However, twisting tires can cause it to release. ! Priming with contact cement will enhance adhesion ! Our tape is simple to install with no special equipment or contractor required. If the tape gets damaged it just takes a few minutes to replace the damaged piece. It is about as thick as normal traffic or floor paint and has a durable, reflective surface. The tape's aggressive adhesive and conformable foil backing insure that when properly applied your white or yellow lines will remain in place. It can be removed if necessary. Longevity depends on wear level and proper installation. The tape performs best on smooth surfaces where all of the tape can make contact with the surface. The tape must be pressed onto the surface well for it to perform properly. A rubber tired dolly with weight on it is often sufficient. An automobile tire is best. Multiple passes with a heavy tire may be neccessary. For large projects we suggest you install a roll of the tape first to determine if it will meet your requirements.