AITRIP 4pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module White I2C OLED Screen Driver DC 3.3V~5V for Arduino (Blue)($9.99Value)

Description

0.91 INCH OLED Display: Resolution is 128*32,Very Clear,Black background with white text display. The main chip is SSD1306; supports DC 3.3V to 5.0V supply. Working Temperature: -30 degrees ~ 70 degrees These I2C OLED display module comes with pin headers, you don't need buy it separately Compatible with Arduino, Raspberry Pi 4B/3B+/3B/2B/Zero,ESP8266, ESP32, STM32, etc The display performance is better than the traditional LCD display, it uses the very common I2C bus, and runs on the SSD1306 display driver, also lower consumption; IIC (I2C communications) simplifies connections.

Note:

Do not reverse VCC and GND. This will cause damage to the OLED display.

Pin Description:

GND: Power Ground

VCC: Power + (DC 3.3 ~5v)

SCL: Clock Line

SDA: Data Line

Specification:

Model: SH-S091

Screen size: 0.91 inch

Interface: IIC

The main chip is: SSD1306;

Operating voltage: 3.3V~5.0V power supply.

Working Temperature: -30 degrees ~ 70 degrees

Display area: 22.384 x 5.584 (mm)

Physical size: 38 x 12 (mm)

Pixel size: 0.159 x 0.159 (mm)

Pixel pitch: 0.175 x 0.175 (mm)

Interface Type: IIC Interface

Number of Pins: 4Pin

Package Including

4 * 0.91 Inch I2C SSD1306 OLED White Display Module