uxcell Pneumatic Solenoid Valve, 2 Position 3 Way G1/4 Aluminum Alloy 2pcs | Air Hand Lever Operated Manual Control Push-pull Direct Acting Type($25.19Value)

Description

[Specification] - Air Flow In and Out Hole Size: G1/4; Exhaust Hole size: G1/4 [Advantage] - Multi-channel compressed air flow break control, easy to install and use [How to Use] - Correspond to the thread specification of the trachea joint and muffler joint, wrap a proper amount of sealing tape and tighten [Application] - It is mainly used for on-off and shunt control of compressed gas in air compressor system, lift, pneumatic can making machine, train horn, pneumatic drilling machine, robot, etc. [NOTE] - 1. Ensure that the thread size of the access hole and muffler hole is correct; 2. If using the corresponding G1/4 thread gauge to detect, there is no problem and can be well matched; if using caliper measurement for reference only, the corresponding thread hole diameter is about 11.5mm. Features:
1.Multi-channel compressed air flow break control, easy to install and use.
2.It has large flow and simply structure. Easy to maintain and operate.
3.It is mainly used for on-off and shunt control of compressed gas in air compressor system, lift, pneumatic can making machine, train horn, pneumatic drilling machine, robot, etc.

How to Use:
Correspond to the thread specification of the trachea joint and muffler joint, wrap a proper amount of sealing tape and tighten.

NOTE:
1.Ensure that the thread size of the access hole and muffler hole is correct.
2.Thread size is G1/4, if using the corresponding G1/4 thread gauge to detect, there is no problem and can be well matched; if using caliper measurement for reference only, the corresponding thread hole diameter is about 11.5mm.
Specification:
Model: 3R210-08
Color: Black, Blue
CV values: 0.89
Control Type: Hand return
Valve Type: 3 Port 2 Position
Two Mounting hole Size :4mm / 0.16"
Exhaust Hole size: G 1/4"
Air Flow In and Out Hole Size : G 1/4"
Seal material: Nitrile Rubber
Main parts material: Aluminum alloy
Working pressure: 1.5 - 8 kgf / cm2
Operating temperature: 5~60 Degree Celsius
Total Size : 88 x 35 x 22mm /3.46" x 1.38"x 0.88" (L x W x H)

Package Included:
2 x Hand Pull Valves