AQUANEAT Small Fountain Pump, 80 GPH Submersible Water Pump for Aquarium Fish Tank, Outdoor Water Fountain, Hydroponics, Pond Filter Pump($5.99Value)

Description

Adjustable flow rate: With a control knob, the maximal flow rate can be up to 80GPH(300L/H); Recommend maximum lift height: 1 foot. 80GPH is the theoretical flow rate at zero lift; the actual output decreases with pipe resistance, lifting height. And the higher the lifting height is, the lower the flow rate will be. For example, the flow rate is 80 GPH at 0 ft (without any water pipe), 40 GPH at 1 ft, 25 GPH at 1.5 ft, and nearly 0 GPH at 2 ft. Measure fountain height before purchase for proper fit. Optional 2 outlets: Fits 5/16"or 1/2"ID (inside diameter) tubing. Dimension: 2" x1.75" x1.25"(L x W x H), mini size, easy to hide or disguise; Length of power cord: 6 feet. Note: This water pump is only suitable for small fish tanks under 5 gallons. Wide application: Perfect for water fountains, pet fountain, aquariums, table fountains, waterfalls, hydroponic systems, irrigation systems and for use in any other water features. Note: To ensure the water pump operates properly, the following steps must be taken: ‌Submersion Requirement‌: The pump must be fully submerged in water. ‌Inlet Clearance‌: The water inlet should be at least ‌50mm‌ below the water surface. ‌Air Removal‌: For the first startup or after water replacement, gently shake the pump to expel any trapped air inside.
This submersible water pump is great for fresh/salt water aquarium, indoor and outdoor fountains, spout and hydroponic systems.
FEATUREs:
Adjustable water flow rate
No need any tools to detach it, easy to separate, easy to clean
Good for a return pump in an aquarium sump
Makes fish tank water changes a breeze
Increase circulation in the reservoir of a hydroponics setup
Suction cup mounting feet for either vertical or horizontal mounting
SPECIFICATION:
Max Flow Rate: 80 GPH (300L/H)
Recommended H-Max (Lift height): 1 foot
Voltage: 110 - 120 V @ 60 Hz
Length of power cord: 6 feet
Outlet: Fits 5/16, 1/2 inch ID (inside diameter) tubing
DIMENSION: 2”x1.75”x1.25“ (L x W x H)
INCLUDES:
(1) Pump
(2) Outlet adapters
Note:
1. Prohibit no-load running. Put the pump into water first before connecting power supply and ensure the pump must be completely submersed under water. It would shorten its lifespan and lead to making loud noises when running in the air for long time.
2. Please clean it regularly in case of debris blockage, the pump would make noises or stop working if blocked by debris.
3. 80GPH is the theoretical flow rate at zero lift; the actual output decreases with pipe resistance, lifting height. And the higher the lifting height is, the lower the flow rate will be. For example, the flow rate is 80 GPH at 0 ft (without any water pipe), 40 GPH at 1 ft, 25 GPH at 1.5 ft, and nearly 0 GPH at 2 ft