SCITOO 2PCS 2" 4 Lug Hubcentric Wheel spacers 4x110mm to 4x110mm | with 10x1.25 Studs 74mm fits 2000-2006 for Rancher 350 2004-2008 for Rancher 400($51.58Value)

Description

2 inch WHEEL SPACERS 4 LUG: vehicle bolt pattern 4x110;wheel bolt pattern 4x110, 74mm Center bore, M10x1.25 thread pitch, 2"(50mm) thick COMPATIABLE VEHICLES: Fit 2002 2003 2004 for Quest 500;1999-2005 for Traxter 500;2008-2012 for DS450(REAR ONLY);1981-1986 for ATC250R; More car type fitment please refer to the description ABOUT THE thickness: Please confirm about the Fender Gap, this decides the thickness range should be fitted. For a car without leveling lifting, to avoid rubbing, the thickness of wheel adapters should be less than the fender gap. For example, if your fender gap is 2", It is better to choose spacers which is less than 2" thick. BENEFITS: the 2 inch wheel spacers 4x110 Widen your vehicle wheels base by allowing for a more aggressive stance, rubbing easily and instantly, greatly improve the vehicle stability! Box Packaged, bolt-on easy installation, save your time and money SCITOO: The body of wheel adapters spacers 4x110mm is made of Forged aluminum. Meanwhile Forged heat-treated and hardened ISO/DIN 10.9 studs deliver strength. Suggested Torque Specs: 63-80 N/M.Important: If the length of the vehicle bolts exceed the thickness of the wheel adapters, you should cut the vehicle bolts
Compability:
for Series
2002-2004 for Quest 500
1999-2005 for Traxter 500
2008-2012 for Can-Am DS450(REAR ONLY)
1981-1986 for ATC250R
1985-1987 for Big Red 250
1997-2004 foreman 400
1998-2004 foreman 450
2005-2013 foreman 500(4WD ONLY)
2001-2009 foreman Rubicon 500
1988-2000 for FourTrax 300
1986-1987 for FourTrax 350
1987-1989 for FourTrax Foreman 350
2000-2006 for Rancher 350
2004-2008 for Rancher 400(4WD ONLY)
2007-2010 for Rancher 420(4WD ONLY)
1997-2009 for Recon 250
2003-2005 for Rincon 650
2006-2014 for Rincon 680
1999-2008 for Sportrax 400(REAR ONLY)
2006-2009 for TRX450R(REAR ONLY)
Note:
Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to:
1) Shorten the factory studs
2) The wheels need to have the open slots (cavities) between mounting holes.
3) Purchase a set of shorter studs and replace them with the factory studs.
Package Including:

2 Wheel Spacers + 8 Wheel Lugs