ATG Alloy Wheel Repair Kit – Rim Scratch and Curb Rash Repair for Silver Alloy and Steel Wheels – Complete Kit with Filler and Paint – Up to 10($16.99Value)

Description

REPAIRS SCRATCHES AND CURB RASH: Helps repair scratches, scuffs, abrasions and small chips on silver alloy and steel wheels for a cleaner and more even appearance. EASY DIY REPAIR IN 3 STEPS: Prepare the damaged area, apply the repair filler and finish with the included silver paint. Repair curb rash and scratches without removing the wheel or visiting a professional workshop. COMPLETE WHEEL REPAIR KIT: Includes repair filler, hardener, silver wheel paint, preparation materials, application tools and gloves for convenient use at home – developed by ATG with over 35 years of experience in automotive repair solutions. ENOUGH FOR UP TO 10 REPAIRS: The included materials can be used for multiple small damaged areas on alloy and steel wheels of cars, SUVs, vans, trucks and motorcycles. DURABLE FINISH AND COLOR NOTICE: The repaired surface is heat-resistant up to 266°F, vibration-resistant and suitable for car washes. The included silver paint matches many common alloy wheels, but an exact color match cannot be guaranteed. DIY repairs like the pros? Rim can remain attached to the car during the repairs. Special filling compound is heat-resistant up to 130° C? Car rim remains vibration- and car wash-proof after repairs The 13-part repair set contains: 1 x transparent rim kit (contents: 6gr., reclosable) 1 x Alu Silver-Metallic Varnish 5ml 2 x alcohol cleaning cloths 1 pair of rubber gloves 1 x file 2 x plastic spatula 2 x brushes 2 x cotton swabs with 1 x extra detailed and multilingual user manual The perfect look in just a few steps: 1. Smooth any unevenness with the rough sandpaper, clean off all dirt, and sand the spot with the fine wet sandpaper.2. Press the required amount of repair filling into a suitable container, fill the damaged spot with the trowel, and let the mass harden for about 20 minutes.3. Afterwards, level the contour to the rim with the sandpaper (first rough and then wet with the fine sandpaper), rub the sanded spot dry with a clean cloth.4. Apply the rim lacquer with the touch-up stick. After 1 to 2 hours, you can operate your vehicle again (your rims will be fully resilient again after 2 to 3 days). Note: Read the instructions carefully before use.